The Pole Setting Machine puts up columns, stakes, support, protections

The Pole Setting Machine is designed for simple pushing in stakes and posts for supporting structures in vineyards and orchards, as well as in the construction of fences and other protection guards. The mechanism is irreplaceable while building solar stations.

Its application is possible for steel, concrete, wooden and plastic poles. Stakes and posts are pushed in either directly where soil conditions allow that or into special borings made by additional hydraulic drill with water supply.

Such technology is usually applied in the conditions of soil or while settling posts of prolonged diameter. Pushing cylinder with lifting up to 100 cm is usually brought into action by hydraulic system of a tractor.

The mechanism is equipped with the system of inclination allowing working on the slopes up to 20°. .

The function of additional hydraulic lateral movement is installed for improving work precision, and is also controlled from the operator’s seat.

In comparison with other technological construction schemes high mobility and productivity is a striking advantage, for example, the average working rate while using metal poles is up to 150 pcs per hour and with concrete poles and using a hydraulic drill it is up to 80 pcs per hour.

The kit includes a hydraulic drill through which water is supplied in order to puncture the soil with the least effort both for a tractor and pole setting machine. Diameter of the drill is 60 x 60 mm..

A pushing cylinder with a lift of up to 100 cm ., usually operated from tractor's hydraulic system.

The mechanism is installed on MTZ - 80 (82) by our specialists. To ensure full-fledged operation of the mechanism a tank with a pump is required to supply water to hydraulic drill.

The Fan Orchard Sprayer MaxiMarin significantly increases productivity

The Fan Orchard Sprayer is designated for providing high quality and smooth spraying of orchards, vineyards, berry fields applying special chemical solutions. Its use guarantees an increase in the yield of applied crops. The treatment performed protects plants from diseases and pests.

Constructive peculiarities of the Fan Orchard Sprayer ensure practicality and effectiveness of protective treatment. Owing to the tower existence spraying can be carried out up to 6 meters in height. The approximate speed of work is up to 15 km / h. with application speed from 60 to 400 liters per hectare.

Completing units and advantages:

• - Tank material - fiberglass;
• - An additional tank for pure water;
• - The solution mixer placed in a tank - hydraulic;
• - Self-injection of fluid into a barrel from external tanks;
• - All metal parts of the sprayer, frame, fan group are galvanized - are not susceptible to corrosion and oxidation. All above mentioned features increase operating life of the machine.
• - The hinged type of a trailing device allows copying ground contour according to the radius of tractor rotation, increasing its cross-country ability and stability on uneven area.

Technical characteristics:

Tank:

Pump:

Fan::

Frame:

Regulator:

The two-row vineyard sprayer of turbine type MaxiMarin

The mechanism is used for processing vineyards, shrubberies of intensive orchards.

Advantages:

• Simultaneous processing of 2 rows at once.
• Fuel saving up to 40%..
• Productivity is 50% higher.
• Possibility of low volume spraying. . It significantly ((for 3-4 times) ) reduces water consumption and, accordingly, the number of refueling and moving.

Tank:

Pump:

Turbine:

Frame:

Regulator::

Fan orchard sprayer with a tower MaxiMarin for orchards and vineyards

The Fan orchard sprayer with a tower is designated for providing high quality and smooth spraying in orchards, vineyards, berry fields with special chemical solutions. Its use guarantees an increase in the yield of applied crops. The treatment performed protects plants from diseases and pests.

Constructive peculiarities of the fan orchard sprayer with a tower ensure practicality and effectiveness of protective treatment. Owing to the tower existence spraying can be carried out up to 6 meters in height. The approximate speed of work is from 8 to 10 km / h. with application speed from 60 to 2000 liters per hectare.

Completing units and advantages:

• - Tank material - fiberglass;
• - An additional tank for pure water;
• - The solution mixer placed in a tank - hydraulic;
• - Self-injection of fluid into a barrel from external tanks;
• - All metal parts of the sprayer, frame, fan group are galvanized - are not susceptible to corrosion and oxidation. All above mentioned features increase operating life of the machine;
• - The hinged type of a trailing device allows copying ground contour according to the radius of tractor rotation, increasing its cross-country ability and stability on uneven area.

Technical characteristics: :

Tank:

2000 l, corrosion resistant fiberglass with stem cutting bar, hydraulic jet mixer, lid with lock, filter, front and side level indicator, drain valve .

Pump:

FAN:

Frame:

Regulator:

Fan unit of tower type

Material: